Buying a waterproof replica watches effectively prevents the watch from fogging
The watch is fogged, that is, the inside of the replica watches lens is covered with a thin layer of mist. In severe cases, small water droplets will condense, causing us to lose sight of the dial. So, why does the watch fog up? How to solve this situation?
1. Although the waterproof ring of the replica watches is sealed and waterproof, the waterproof performance is not static, because long-term use or improper operation causes the aging of the waterproof rubber ring. In an environment with large temperature differences, the rubber ring thermally expands and shrinks to create a gap, which makes the surrounding environment Moisture can take advantage of it.
2. With the rapid change of the ambient temperature, according to the principle of the change of the state of water, different fogging will appear on the replica watches surface. When the outside temperature is high, the water is in a gaseous state; when the temperature decreases, the water vapor will condense into small water droplets when it encounters the sapphire crystal with a lower temperature.
3. In winter, from outdoors to indoors, the temperature becomes higher, the humid air inside the watch “atomizes”, and the mist adheres to the watch mirror. As the water mist condenses and the light is refracted, the pressure inside the replica watches decreases. The longer the condensation time, the greater the water mist. Eventually it may lead to the formation of water droplets or even water jets. This phenomenon is called invisible water intake!
Some maintenance tips
Fully understand the waterproof performance of your watch. Even if it is a diving watch, do not wear a hot bath, sauna, etc. The waterproof rubber ring cannot completely block water vapor from entering the watch, let alone large temperature differences. At the same time, do not perform operations such as adjusting the crown in the water.
Avoid knocking the replica watches case, the first parts and other parts, if accidentally impacted and deformed, it will affect the sealing and waterproof performance of the watch.
Avoid wearing the replica watches in an environment with extreme temperature differences, or take protective measures.
If you encounter fogging on your replica watches, if you can’t detect it yourself, it is recommended to go to a formal and professional service center for inspection.
In short, the fogging of the watch is not a trivial matter. If it is not handled in time, it may affect the normal operation of the watch. Must be taken seriously!
1. We can try to avoid letting the watch come into contact with water. For example, do not wear the watch when washing clothes, washing your face, or bathing. It should be protected from getting wet in rainy days, and don’t let it stay in a humid environment for a long time.
2. No exposure to sunlight. Do not let the hot sun shine directly on the replica watches, and cause a large temperature difference between the inside of the watch and the outside, and accelerate the aging of the waterproof rubber ring.
3. After the fake watches adjusts the time, we need to return the crown to gear 0, which is the state when it is not pulled out. Otherwise, water vapor will easily penetrate into the watch from the crown